Qualitative Analysis of Anions Essay

The objective of this experiment was to use qualitative analysis to determine the chemical substance characteristics of four known anions by systemic collateral testing. The chemical characteristics observed were to be used to identify an unknown model. Sulphuric acid was to be added to a carbonate ancestor and an effervescent reaction would confirm the forepart of carbonate anions. Another essay of carbonate firmness was to be reacted with hydrochloric acid and the gaseous harvest-feast was to be reacted with a suspend drop of barium carbonate. The front line of clouding in the droplet would also confirm the movement of carbonate anions. smooth nitrate was to be added to chloride upshot and the formation of a ashen flow, ash grey chloride, would confirm the charge of chloride anions. Ammonium hydroxide would be added to dissolve part of the precipitate.The resultant supernatant beginning was to be decanted and re-acidified with nitric acid to reform the precipitate a nd definitively confirm the presence of the chloride anion. Silver nitrate was to be added to iodide event and the formation of a yellow-bellied precipitate, silverish iodide, would confirm the presence of iodide anions. Another strain of iodide solution was to be reacted with drops of acetic acid until suitablely acidic. Potassium nitrate was to be added to the solution causing a colour flip-flop. Methylene chloride was to be added to this sample and shaken to confirm the presence of iodide anions by forming two separate and differently coloured levels. A barium chloride-calcium chloride garland was to be added to sulphate solution and heated to 90oC. The sample was to stand for a period of time to allow the formation of awhite precipitate, barium sulphate, sustain the presence of the sulphate anion. The extension of hydrochloric acid and subsequent passion were to devour no effect on the presence, further corroborate the presence of sulphate anions.MATERIALS AND METH ODSEQUIPMENTCHEMICALS turn out thermionic vacuum tubesCarbonate Solution,Test tube rackConcentrated Sulphuric acid, H2SO4Eye dropper6M Hydrochloric acid, HCLGraduated pipetteBarium hydroxide solution Ba(OH)2Pipette medulla oblongataChloride solution, Cl-Pasteur pipetteIodide solution, I-Beaker0.1M Silver nitrate, AgNO3ThermometerConcentrated Ammonium hydroxide, NH4OH6M Nitric acid, HNO36M Acetic acid. HC2H3O2Potassium nitrate, KNO2Methylene chloride solution, CH2Cl2Sulphate solution,Barium chloride-Calcium chloride mixture, BaCl2-CaCl2 terra incognita exemplification 7 sentry dutyCarbonate solution is hazardous in shield of skin ghost (sensitizer, irritant), of eye make (irritant), inhalation (lung irritant), and ingestion. It should be kept in a cool, well-ventilated area. In cause of spill, use appropriate tools to put the spilled solid in a convenient waste temperament container and neutralize the resi cod with a dilute solution of acetic acid. Hydrochloric acid is very hazardous in slick of skin contact (sensitizer, corrosive, irritant, permeator), eye contact (corrosive, irritant), of inhalation (lung sensitizer, respiratory tract irritant), and ingestion (toxic). It should be kept in a dry container, kept away from oxidizing agents, organic materials, metals, alkalis, and moisture. In case of spill, dilute with water and wipe with an unbiassed dry material. residue should be neutralized with dilute sodium carbonate. Chloride solution is hazardous in case of skin contact (irritant, permeator), of eye contact (irritant), ingestion, and inhalation (irritant).In case of spill, dilute with water and mop with an inert dry material and spread water on the contaminated surface. Iodide solution is lightly hazardous in case of skin contact (irritant), of eye contact (irritant), of ingestion, and inhalation. In case of spill, use appropriate tools to put the spilled solid in a convenient waste judicature container. And spread water on the contaminated surface. Silver nitrate is very hazardous in case of skin contact (corrosive, permeator), of eye contact (irritant), of inhalation, and ingestion.. Silver nitrate kept away from heat, sources of ignition, and combustible material. In case of spill, use appropriate tools to put the spilled solid in a convenient waste disposal container. Ammonium hydroxide is very hazardous in case of skin contact (toxic, corrosive, irritant, permeator), eye contact (irritant), inhalation (toxic to upper respiratory tract), and ingestion (toxic). pissing should never be added to ammonium hydroxide and it should be kept away from incompatibles such as metals, acids. In case of spill, dilute with water and mop with inert dry material.Neutralize residue with dilute acetic acid. Nitric acid is very hazardous incase of skin contact (corrosive, irritant, permeator), of eye contact (irritant, corrosive), and ingestion. It is slightly hazardous in case of inhalation (lung sensitizer, respiratory tract and m ucus membrane irritant). Nitric acid is explosive in the presence of trim back materials, of organic materials, of metals, of alkalis. In case of spill, dilute with water, mop with an inert dry, and neutralize the residue with a dilute solution of sodium carbonate. Acetic acid is very hazardous in case of skin contact (irritant), of eye contact (irritant), of ingestion, of inhalation. It is hazardous in case of skin contact (corrosive, permeator), of eye contact (corrosive). It should be kept away from sources of heat, ignition, and oxidizing material. In case of spill, Dilute with water, mop with an inert dry, and neutralize the residue with a dilute solution of sodium carbonate.Potassium nitrite is highly hazardous in case of skin contact (corrosive, irritant), of eye contact (irritant), of ingestion, and inhalation. In case of spill, use appropriate tools to put the spilled solid in a convenient waste disposal container. Potassium nitrite should be kept dry, away from sources of ignition, heat, and combustible materials. Methylene chloride is very hazardous in case of eye contact (irritant), of ingestion, of inhalation, and skin contact (irritant, permeator). In case of spill dilute with water and mop with an inert dry material. Sulphate solution is hazardous in case of eye contact (irritant), skin contact (irritant), and ingestion. In case of skin contact, wash with soap and water, and c all over area with an emollient. In case of spill, Dilute with water, mop with an inert dry material spread water on the contaminated surface. ( loreLab, 2005)PROCEDUREPlease refer to Lab 3 Qualitative compend fiber 2- Anions chemistry Laboratory Manual 2013-2014, Durham College, pages 11-12 for full list of Materials and Methods.OBSERVATIONSTable 1a Testing for the presence of Carbonate, CO32- anions2 drops strong H2SO4 added, Test tube shaken extensional ObservationsCarbonate Solution, 3mLeffervescence seen as colourless gas rises from quarter of test tube test tub efeels much warmer, upon wafting the gas has a mildly unpleasant, acerb smell The presence of an effervescent reaction indicated that the sample had carbonate anions present.Table 1b Testing for presence of Carbon Dioxide, CO2 to confirm the presence of CO32- anions2 drops 6M HCl1 drop BaOH suspended over test tubeCarbonate Solution, 3mLsmall amount of effervescence notedabout 5 seconds after creation suspended over test tube, the base of the droplet clouded with white precipitate The access of HCl to the sample resulted in some rising gas bubbles, indicated that a gas was being formed. The clouding of the barium hydroxide droplet indicated it was reacting with carbon dioxide escaping the tube and thus substantiate the presence of carbonate anions in the sample. Table 2 Testing and confirming for the presence of Chloride, Cl- anions5 drops 0.1M AgNO3 addedNH4OH is added drop-wiseSupernatant solution is decanted,6M HNO3 is addedChloride Solution, 5mL ambiguous white precipitate f ormedprecipitate partially dissolved upon addition, distinct forgive supernatant formed above remaining precipitate cloudy white precipitate reformed, small white granulations settled at bottom of test tube 6 drops of ammonium hydroxide, NH4OH, were added to the sample 6 drops of the nitric, HNO3, were added to acidify the sample The formation of a cloudy white precipitate in the presence of silver nitrate indicated that the sample had chloride anions present. The subsequent addition of ammonium and re-acidification of the sample resulted in the reformation of a cloudy whit precipitate, thus confirming the presence of chloride anions. Table 3a Testing for the presence of Iodide, I- anions5 drops 0.1M AgNo3 addedIodide Solution, 5mLcloudy pale yellow precipitate formedThe presence of a cloudy yellow precipitate with silver nitrate indicates presence of iodide anion. Table 3b Testing and confirming the presence of Iodide, I- anionsAcetic acid is added drop-wise2 drops KNO2 added15 d rops Methylene chloride added, test tube shakenIodide Solution, 5mLBlue Litmus Paper confirmed the solution was acidic by turning red solution turned a mustard-brown colour2 distinct layers formed in the test tube. The bottom layer was reddish magenta, and the top layer was a burnt-orange colour 2 drops of acetic acid, HC2H3O2, were added to acidify sample Upon confirming the sample was indeed acidic, it reacted with the potassium nitrate to change to a mustard-brown colour. The addition of the methylene chloride formed 2 distinctly coloured layers, thus confirming that the solution had iodide anions present.Table 4 Testing and confirming the presence of Sulphate SO42- anions0.5mL of BaCl2-CaCl2 mixture addedTest tube heated, stood for 10 minutes5 drops 6M HCl, test tube heatedSulphate Solution, 3mLvery faint wisps of cloudy white precipitate appearednoticeable cloudy white precipitate distri onlyed throughout solution addition of HCl made test tube feel warmafter heating test tube precipitate remained dispersed in solution In each instance of heating, the test tube was placed in a boil water bath at 90oC The final heating of the test tube was for approximately 5minutes at 90oC The reaction of the sulphate solution with the barium chloride-calciumchloride solution, when heated, resulted in the mien of a fine white precipitate, indicating the sample had sulphate anions present. The subsequent addition of HCl and reheating resulting in the solution remaining relatively the same further confirmed that sulphate anions were present. Table 5a Testing for Unknown Sample 7 for the presence of Carbonate, CO32- anions2 drops concentrated H2SO4 added, Test tube shakenAdditional ObservationsUnknown Sample 7, 3mLno visible effervescenceno noticeable change to test tubes temperatureThe lack of effervescence and heat produced by the sample indicated the absence of carbonate anions in the sample. Table 5b Testing Unknown Sample for presence of Carbon Dioxide, CO2 to confirm the presence of CO32- anions2 drops 6M HCl1 drop BaOH suspended over test tubeUnknown Sample 7, 3mLno noticeable effervescencesuspended droplet remained clear, despite being held over test tube for 15 seconds The sample did not react with the hydrochloric acid to produce a gas that reacted with the barium hydroxide, thus the suspended droplet remained clear. The results further confirmed the absence of carbonate anions. Table 6 Testing and confirming Unknown Sample for the presence of Chloride, Cl- anions5 drops 0.1M AgNO3 addedNH4OH is added drop-wiseSupernatant solution is decanted,6M HNO3 is addedUnknown Sample 7, 5mLpale yellow precipitate formedno change to solutionno change to solution6 drops of ammonium hydroxide, NH4OH, were added to the sample Nitric acid, HNO3, was unable to be added to the precipitate as no clear supernatant was formed The lack of formation of a cloudy white precipitate in the presence of silver nitrate indicated that the sample did not have chloride ani ons present. The subsequent addition of ammonium and re-acidification of the sample were rendered purposeless. Table 7a Testing Unknown Sample for the presence of Iodide, I- anions5 drops 0.1M AgNo3 addedUnknown Sample 7, 5mLcloudy pale yellow precipitate formedThe presence of a cloudy yellow precipitate with silver nitrate indicates presence of iodide anion. Table 7b Testing and confirming Unknown Sample for the presence of Iodide, I- anionsAcetic acid is added drop-wise2 drops KNO2 added15 drops Methylene chloride added, test tube shakenUnknown Sample, 5mLBlue Litmus Paper confirmed the solution was acidic by turning red solution turned a mustard-orange colour2 distinct layers formed in the test tube. The bottom layer was reddish-purple, and the top layer was an orange-brown 2 drops of acetic acid, HC2H3O2, were added to acidify sample Upon confirming the sample was indeed acidic, it reacted with the potassium nitrate to change to a mustard-orange colour. The addition of the methy lene chloride formed 2 distinctly coloured layers, thus confirming that the solution had iodide anions present. Table 8 Testing and confirming Unknown Sample for the presence of Sulphate SO42- anions0.5mL of BaCl2-CaCl2 mixture addedTest tube heated, stood for 10 minutes5 drops 6M HCl, test tube heatedUnknown Sample, 3mLno precipitate formedno noticeable precipitate formedno change to solutionIn each instance of heating, the test tube was placed in a stewing water bath at 90oC The final heating of the test tube was for approximately 5minutes at 90oC The lack of precipitate formation in the test indicated that the sample was absent of sulphate anions. This result was further confirmed by the subsequent addition of hydrochloric acid and reheating failing to produce a precipitate.DISCUSSIONA strengthened acid such as H2SO4, sulphuric acid, combined with carbonate produces an effervescent reaction due to the formation of carbon dioxide. The heat felt from the test tube was a result of the exothermic reaction that the carbonate solution underwent in the presence of a strong acid. Sulfuric acid is a strong acid, but only for the first H, so it dissociates into H+ ion and the bisulfate ion, HSO4-. HSO4- is a weak acid and does not dissociate to a great extent, but it also reacts with carbonate (Dartmouth College, 2003). The presence of sulphur may have accounted for the mildly unpleasant scent wafted during the experiment. As indicated by the results of Table 1b, the formation of CO2 acted as a positive index for the presence of CO32- in a solution, as expressed by 2H+(aq) + CO32-(aq) H2O(l) + CO2(g).The exposure of the produced gas, carbon dioxide, to barium hydroxide resulted in the a cloudy white precipitate due to the formation of barium carbonate as expressed by H2O (l) + CO2 (aq) + Ba2+(aq) BaCO2 (s) + 2 H+(aq). The addition of 01M AgNO3, silver nitrate, to the chloride solution resulted in the formation of a white precipitate due to the formation of silve r chloride as expressed by AgNO3 (aq) + Cl-(aq) AgCl(s) + NO3 (g). It is interesting to note that chlorides are generally soluble, with the exception of lead(II) and silver chloride. When concentrated NH4OH was added to the silver chloride precipitate dissolved due to the formation of an ammine complex, Ag(NH3)2+. Silver nitrate is generally acidified with dilute nitric acid to prevent the downfall of other non-halide silver salts (Brown, 2012).Nitric acid acidified the solution due to the addition of H+ ions to the solution, resulting in re-precipitation, thus definitively indicating the presence of chloride anions. This is expressed as AgCl(s) +2NH3(aq) Ag(NH3)2+(aq) + Cl-(aq) Ag(NH3)2+(aq) + Cl-(aq) + 2H+(aq) AgCl(s) + 2NH4+(aq) The addition of 0.1M AgNO3 to the iodide solution resulted in the formation of a cloudy yellow precipitate as expressed by AgNO3(aq) + I- AgI(s), which as a precipitate is indissoluble in concentrated ammonia. The addition of 6M acetic acid, HC2H3O2 , acidified the solution, as confirmed by the litmus test. The newly acidic solution reacted with potassium nitrite, KNO2, reducing the nitrite to nitrogen dioxide as expressed by I-(aq) + KNO2 KI(aq) + NO2(g). The liberation of iodine in the reaction resulted in a brownish change in colouration of the solution (SUNY Chemisty, 2005). The failure of the sample to turn a reddish-brown may have been a source of error due to a failure to sufficiently rinse the cleaned test tube with DI water.Methylene chloride, CH2Cl2, which is a non-polar organic compound was added to the solution reacted with the iodide in the solution to form a violet coloured layer of denser solution, which settled at the bottom of the test tube. An substitute means of testing for the presence of iodide anions would have been to use starch, which forma a characteristic blue-black complex. The addition of the barium chloride-calcium chloride mixture, BaCl2-CaCl2, to the sulfate solution resulted in the formation of an insoluble white sulphate, barium sulphate as expressed by Ba2+(aq) + SO42-(aq) BaSO4(s). Other insoluble barium salts contain anions of weak acids (CO32-, SO32-and PO43-). Precipitation of these anions is generally prevented by acidifying the solution (Yoder, 2014). The products of the reaction were made more prominent by the catalyzing the reaction with heat, resulting in a more noticeably fine white precipitate distributed throughout the solution.The addition of 6M HCl, hydrochloric acid, served to acidify the solution, further illustrating the insolubility of the barium sulfate precipitate, thereby confirming the presence of sulphate anions. The unknown sample was placed through all confirmatory tests. It failed to react with Sulphuric acid and hydrochloric acid to produce an effervescent reaction, indicating it was carbonate absent. Unknown Sample 7 did not react with the BaCl2-CaCl2 mixture to form a precipitate regardless of heat, indicating the absence of sulphate anions . Unknown Sample 7 formed a pale cloudy yellow precipitate upon the addition of silver nitrate, immediately indicating the presence of iodide anions, disqualifying the need to testfurther for chloride. The addition of acetic acid to Unknown Sample 7 provide a sufficient acidic environment for the potassium nitrate to release iodine, thus the solution appeared as a dark mustard orange. The methylene chloride confirmed the presence of iodide anion when a distinct reddish-purple layer settled at the bottom of another distinctly coloured layer of solution.CONCLUSIONBased on the results of the experiment, Unknown Sample 7 demonstrated the formation of a precipitate in the presence silver nitrate, a change in colouration when mixed with potassium nitrate, and the formation of 2 distinctly coloured layers when methylene chloride was added to the solution and shaken. In accordance with the chemical properties exhibited by the 4 known anions during the qualitative testing, it can be conclude d the Unknown Sample 4 clearly demonstrated the characteristic chemical responses of a solution with I- ions present.QUESTIONS1. An ion is an atom that has lost or gained an electron to form a charged particle.2. An anion is a negatively charged particle due to the atom gaining one or more electrons. A cation is a positively charged particle due to the atom losing one or more electrons.3. H2SO4(aq) + Na2CO3(aq) Na2SO4(aq) + H2O(l) + CO2(g)4a. Aluminum ion Group IIIA, Al3+4b. Sulphur ion Group VIA, S2-4c. Iodide ion Group VIIA, I-4d. Oxygen ion Group VIA, O2-4e. Chloride ion Group VIIA, Cl-REFERENCESBirk, J. P. (2001, December 4). General interpersonal chemistry With Qualitative Analysis. Retrieved from Arizona State University http//www.public.asu.edu/jpbirk/qual/qual.html Brown, W. (2012). Chemical Tests. Retrieved from Doc Browns Chemistry http//www.docbrown.info/page13/ChemicalTests/ChemicalTestsa.htm DartmouthCollege. (2003, May). ChemLab Chapter 5. Retrieved from Qualitative Analysis of Cations http//www.dartmouth.edu/chemlab/chem3-5/qual_an/overview/procedure.html ScienceLab. (2005, October 10). Material Safety Data Sheet (MSDS) List. Retrieved from Science Lab http//www.sciencelab.com/msdsList.php SUNY Chemisty. (2005, December). Anion Analysis. Retrieved from Chemistry 112 http//employees.oneonta.edu/kotzjc/LAB/Anion.pdf Tro, N. J. (2011). Essential Introductory Chemistry (4th ed.). Toronto Prentice Hall. White, R. (2013-2014). Qualitative Analysis Part 2- Anions. Chemistry 1 Laboratory Manual, 7-9. Yoder, C. (2014, November). Qualitative Analysis of CAans and Anions. Retrieved from Wired Chemist http//www.wiredchemist.com/chemistry/instructional/laboratory-tutorials/qualitative-analysis